Products

Non-split Vacuum Tube Solar Water Heaters

Features:

1)  Inner water tank shell is made of SUS304-2B food grade stainless steel plates,
and outer tank shell is made of SUS304-2B food grade, welded by argon arc. Water is
pure and drinkable
2) Heat insulation of water tanks adopts polyurethane foam and the thickness is 55mm
3) Silicon rings to connect and seal them
4) The life of the water heater can be 20 years.
5) Whole  strong borosilicate vacuum tubes adopt super hard borax and silica glass
6) Absorption rate: =94%, thermal radiation rate: =6% 
7) It resists 25mm hail 
8) Temperature when exposed to sun without water: 250°C, 2 hours to boiling
point if using single tube
9) If you use electrical appliances, it will begin to work when the temperature of
the water is below 60°C, and will switch off automatically when the temperature
reached 60°C.
10) You have to test the water temperature before using, in order to avoid scalding

11)Capacity: 85L - 300L

Specifications	Vacuum tube	Outer tank	Frame
Ø420-(ø47)	1.5m	Stainless steel	Stainless steel
Ø470-(ø47)	1.5m	Stainless steel	Stainless steel
Ø470-(ø58)	1.8m	Stainless steel	Stainless steel

Mobile Phone Solar Charger

Specifications of Solar Cell Panels─ 1. Solar Panel Dimensions:180mm x 130mm *2 PCS 2. Cell Type: Monocrystalline 3. Cell Efficiency: 15.50% 4. Open Circuit Voltage: 7.2V 5. Peak Voltage :6V 6. Peak Current:450 mAh 7. Peak Watt :2.70 W 8. Panel output is computed +/-10% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance is +/- 10% Specifications of Battery Box─ 1. Battery Capacity:3.7V 2200mAh(max) 2. Output Current:750 mA(max) 3. Charge Display:Charging In(red) 4. Full Charged In(green) 5. Battery Type:Li-Ion 6. Battery Weight:70g 7. Battery Dimensions:83*35*22mm Freature─ 1. Battery low indicator: when battery voltage is low, the led light will be on. Please dismount the load at once and renew the standby battery as soon as possible. 2. Charge indicator: when the standby battery is being charged by solar, the charge indicator lights green. After charged, the light will be off. ( The indicator is valid only under solar-power charge. If external charge, refer to the direction of the external charger). 3. External charger input: when sunshine is not enough, please use external soure to charge the battery. 4. 5.6V and 8.4V DC output: 350mA (max.) output current 5. 13.7V DC output: 450mA (max.) output current 6. 19V DC output: 1.5A (max.) output current 7. Dimension: 272*205*28mm 8. Weight: 1.45kg 9. 8 laptop connecters & 5 mobile phone connecters